- What is the minimum distance from toilet to wall?
- What happens if you don’t vent a toilet?
- Is it expensive to relocate a toilet?
- Does a downstairs toilet need a soil stack?
- How far can you move a toilet from the stack UK?
- Can a toilet shower and sink share a vent?
- Can 2 toilets share a vent?
- Can you move toilet plumbing?
- How far can you put a toilet from the stack?
What is the minimum distance from toilet to wall?
15 inchesMost codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture.
(The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet..
What happens if you don’t vent a toilet?
Poorly-vented drain lines will not be able to effectively move wastewater and solid waste out of your building. This could lead to problems such as overflowing drains, backed-up toilets, and similar plumbing issues.
Is it expensive to relocate a toilet?
The cost to move a toilet or sinks can be $2,500-$3,500 per fixture. Plumbing can be a significant cost factor in a remodel when a bathroom floor plan is altered. The toilet is the most expensive to move.
Does a downstairs toilet need a soil stack?
Re: Fitting downstairs toilet No need for a soil stack as the drainage system as installed is served by the other stack. You would pipe your new toilet direct to the nearby inspection chamber. Your new toilet/drain would be vented by fitting a local air admittance valve.
How far can you move a toilet from the stack UK?
Six metres is the maximum run according to Building Regualtions, but as you have realised yourself, a good fall on the branch pipe is essential. 2.5º, or 44mm fall for every metre run, is the usual standard. IIRC it is permissible (but inadvisable) to go as low as 18mm per metre, the maximum is 90mm per metre.
Can a toilet shower and sink share a vent?
As a general rule, you will just be able to vent 2 fixtures on a toilet wet vent. … 1) Toilet and Sink: The toilet is vented through the sink drain. The toilet drain should be 3″, the sink drain is 1.5″, the shared sink drain/toilet vent area should be 2″, and the vent going up should be 1.5″.
Can 2 toilets share a vent?
Most houses have more than one toilet, and if they are on the same side of the house, their waste lines can usually tie into the same stack. If they are on opposite sides, however, each may need its own stack. Since the stacks must be vented, this would mean two vent openings on the roof.
Can you move toilet plumbing?
Moving the toilet is not a change to be taken lightly. But if needed, it can be accomplished with substantial plumbing work and a great deal of peripheral work, such as opening up a floor or ceiling, rerouting pipes and drain flange, and re-installing the toilet and other fixtures.
How far can you put a toilet from the stack?
Install the new toilet within six feet of the main soil stack in your house, if possible. The main stack is a length of 3- or 4-inch pipe that runs vertically from the main bathroom to the sewer.